Tilemaster FAST One Coat DPM is ideal for use as a damp proof membrane where the residual moisture content in a new or existing cementitious screed is up to 98% Relative Humidity (RH). Tilemaster FAST One Coat DPM can also be used in a one coat application to deal with damp substrates where a structural damp proof membrane is not present or where the structural damp proof membrane is ineffective.
Once cured, Tilemaster FAST One Coat DPM produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds, up to 90% RH on heated calcium sulphate screeds and up to 95% RH on unheated calcium sulphate screeds, without resulting in bond strength issues. Tilemaster FAST One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids.
A stock item which is normally available in store or for delivery immediately
Available in a choice of 2 sizes Tilemaster Fast One Coat damp proof membrane is a two component, solvent free, one coat epoxy Damp Proof Membrane. Tilemaster FAST One Coat DPM is suitable for use in a one coat application on a wide range of substrates including concrete, sand & cement screeds and calcium sulphate screeds.
For further information please contact the Direct Tile warehouse team or follow the links for the Technical Data Sheet and the Health and Safety Data Part A and Part B
When applied to a smooth surface using an A2 trowel: A 3kg unit will cover up to approximately 7.5m2, a 7kg unit will cover up to approximately 17.5m2 and a 14kg unit will cover up to approximately 35m2.
